How to Fix Slime: Sticky, Hard, Runny or Old

Most slime problems come from the balance between glue and activator. Too little activator and slime is sticky or runny; too much and it turns hard and rubbery. Here is how to fix each problem, starting with the gentlest option.

Sticky slime

  1. Knead first. Fresh slime is always a bit sticky. Knead for two to three minutes before adding anything.
  2. Add activator in tiny amounts. A few drops of contact lens solution (or ½ teaspoon of your activator) at a time, kneading in between.
  3. Cool hands help. Warm hands make slime stickier. Rinse your hands in cold water and dry them before playing.
  4. A little baby oil or hand lotion on your hands stops slime sticking without changing the slime itself.

Hard, rubbery slime that snaps

This is the result of too much activator. You cannot remove activator, but you can relax the slime:

  1. Soak the slime in warm (not hot) water for a minute, then knead the water in.
  2. Knead in a pump of hand lotion. Lotion softens the slime and makes it stretchier.
  3. If it is still stiff, knead in a teaspoon of fresh glue, then a drop of activator to bring it back together.

Runny slime that will not hold its shape

Add activator slowly while stirring, then knead. If it still will not come together:

  • check the glue is PVA (school glue), not a glue stick or craft adhesive;
  • check the contact lens solution contains boric acid and sodium borate;
  • try adding a pinch more baking soda if you are using contact solution.

Dried out, old slime

  1. Put the slime in a bowl of warm water for a few minutes.
  2. Knead it under the water, then take it out and keep kneading. It will be slippery at first.
  3. Add a little lotion to restore stretch.

If it has gone hard all the way through, it is usually easier to make a new batch.

Fluffy slime that deflated

The air bubbles in fluffy slime escape over a few days. Knead in a little fresh shaving foam and a drop of activator to bring some fluffiness back.

Cloudy clear slime

Bubbles from stirring make clear slime look cloudy. Put it in an airtight jar and leave it alone for three to five days. The bubbles rise and escape, leaving it glass-clear.

How to store slime

  • Airtight container such as a jar with a lid or a zip bag with the air squeezed out.
  • Room temperature or cooler. Heat makes slime runny; the fridge is fine for most slimes and slows down mould.
  • Clean hands. Dirt and food on hands are the main reason slime goes mouldy.

Stored well, glue slime typically lasts a few weeks. Food-based slimes, such as psyllium or chia slime, last only a day or two.

When to throw slime away

  • It smells bad or sour.
  • You see mould spots, fuzz or colour changes.
  • It has picked up hair and dirt you cannot remove.
  • It irritates the skin.

Throw old slime in the bin, not down the sink, as it can clog drains. Ready for a fresh batch? Start with the basic slime recipe or work out the amounts with the slime calculator.