Clear slime starts cloudy and full of bubbles, then turns glass-clear after a few days of rest. The recipe is simple; patience is the secret ingredient.
Clear slime recipe
Makes: about 1 cup · Active time: 10 minutes · Rest: 3–5 days
Ingredients
- ½ cup (120 ml) clear PVA glue
- ½ cup (120 ml) room-temperature water
- Activator: ½ teaspoon borax dissolved in ½ cup (120 ml) warm water, or ½ teaspoon baking soda plus about 1 tablespoon contact lens solution with boric acid and sodium borate
Method
- Pour the glue and water into a clean bowl and stir slowly until combined. Fast stirring adds bubbles.
- If using contact solution, stir in the baking soda now.
- Add the activator a tablespoon at a time (contact solution: a teaspoon at a time), stirring gently after each addition.
- When the slime pulls away from the bowl, knead it briefly with clean hands. It will look cloudy; that is normal.
- Put it in an airtight, clear jar and leave it alone for 3 to 5 days. The bubbles rise and escape and the slime becomes clear.
Scale the recipe for bigger batches with the slime recipe calculator (choose “Clear slime”).
Why clear slime goes cloudy, and how resting fixes it
Clear slime is clear glue cross-linked by borate (see how slime works). The cloudiness is mostly thousands of tiny air bubbles trapped while mixing and kneading. Slime flows very slowly, so if you leave it undisturbed the bubbles gradually rise and pop. Every time you play with it you add a few more, which is why clear slime gets cloudy again with use.
Tips for the clearest slime
- Use clear glue, not white glue. White glue can never become transparent.
- Stir slowly and knead as little as possible before resting.
- Use distilled or filtered water if your tap water is very hard; minerals can add a slight haze.
- Keep everything clean. Dust and lint show up clearly in clear slime.
- Do not over-activate. Too much activator makes clear slime stiff and more likely to tear and trap air.
Variations
- Tinted clear slime: add one tiny drop of food colouring. More than that makes it opaque.
- Glitter or “galaxy” slime: fold in fine glitter after the resting period, gently.
- Fishbowl slime: add clear plastic fishbowl beads for a crunchy texture; see crunchy slime.
- Jelly cube slime: clear slime with foam cubes is a favourite for ASMR; see jelly cube slime.
Troubleshooting
| Problem | Fix |
|---|---|
| Still cloudy after a week | Too much activator or very hard water. Rest it longer, or make the next batch with less activator. |
| Too runny | Add a few drops of activator, stir gently, rest again. |
| Hard and tearing | Knead in a little warm water, then rest. |
| Yellowish tint | Some clear glues yellow slightly with age. Fresh glue gives the clearest result. |
More fixes in how to fix slime. Always make slime with adult supervision and keep borax activator away from small children.